QT605 Thin Line In-ceiling Quick Mount 2-way Speaker

THIS PRODUCT HAS BEEN DISCONTINUED 02/2013

The QT605 thin line in-ceiling speaker is the budget-minded answer for both residential and commercial in-ceiling speaker applications where a modern, discrete look is desired. The QT605 streamlines the in-ceiling speaker look with a new thin flange, and low profile micro-perforated grille, causing the look of the speaker to be exceptionally unobtrusive by mounting flush to a ceiling. The QT605 is ideal for many applications where traditional speakers may be impractical or impossible. An innovative mounting mechanism speeds up speaker installation time. This mechanism requires the installer to simply push either the supplied L-shaped tool or a screwdriver straight into the socket to activate the mounting mechanism. It will then automatically swing out and lock the speaker into place in the ceiling. Once the hole has been cut in the ceiling or wall the speaker can literally be installed in a few seconds; no other tools except wire strippers are required to install this speaker. The QT605 employs a 6½-inch polygraphite woofer cone and a 1-inch swivel fabric dome tweeter for great sound. The QT605 is especially well suited for distributing sound throughout the entire home and can be used to enhance surround sound systems. The QT605 is packaged with an L-shaped quick installation and removal tool, grille adhesive; hole cutout template and paint mask.

DESTINATION AUDIO PRODUCTS: Accessories | Center Channel Speakers | In-ceiling Speakers | Infrared Products | Install Brackets
In-wall Speakers | LCR Speakers | Outdoor Speakers | Subwoofers | Volume Controls | Product Warranty | Discontinued Products

 Applications
• Two-channel Audio
• Multi-room Audio
• Home Theater Rear Channels
• Pools, Spas, Hot Tub Rooms, etc.
• Outdoor Audio (with no extended contact with water)

 Warranty
10 Year Limited Warranty

 Recommended Install Bracket
IBC6QT 6½ " Round In-ceiling Quick Installation Bracket

 Specifications
Series:
Woofer: 
Tweeter: 
Power Handling: 
Impedance:
Frequency Response: 
Sensitivity: 
Cutout Dimensions: 
Finished Dimensions: 
Finished Depth: 
Weight: 
BuildersThin Elite Quick Mount
6.5" (133mm) Poly Graphite
1" (25mm) Swivel Fabric Dome
2-60 Watts
8 Ohm
56Hz–20kHz ±3dB
88dB (2.83V/1 meter)
8.375" (213mm) Dia
9.313" (238mm) Dia.
2.875" (76mm)
2.55 lbs. (1.16 kg) each



 Product Downloads
QT605 Thin Line Quick Mount Manual
Product Specification Cut Sheet